brass plated steel strips

brass plated steel strips 1. Material: T2 Copper 2. Thickness: 0.2mm - 2.5mm 3. Width: no more than 600mm brass plated steel strips  Specifications of   brass plated steel strips 1. Thickness (δ): 0.2mm - 2.5mmTolerance of Thickness (Δ1): δ≤0.5mm, Δ1=0.04mm1.0mm≥δ>0.5mm, Δ1=0.06mmδ>1.0mm, Δ1=0.08mm2. Width (w):T2(copper): w≤580mmH65(Brass): w≤450mmTolerance of Width (Δ2): w≤200mm, Δ2=0.5mm400mm≥w>200mm, Δ2=0.8mmw>400mm, Δ2=1.0mm3. Specification:For Coil:Inner Diameter: 508mm/250mm/100mmOutside Diameter: no more than 1400mmFor Sheet: Length: 450mm~800mmProperty of brass plated steel strips

Temper	Tensile Strength(N/mm2)	Elongation (%)	Feature
TM	≥280	≥45	Excellent Ductility, suitable for deep stamping
M	≥290	≥33	Good Ductility, suitable for general stamping
Y2	350 - 450	≥5	Used to manufacture bending parts
Y	≥460	-	Used to manufacture simple bending part
TY	≥650	-	High Strength and Flexibility

  Manufacturing of brass plated steel strips We use sand paper to polish the surface of Brass and steel. Then, mill imposes 130T pressure on the brass and steel to make them cohesive. Next step is the anneal procession, in which big annealing furnaces are applied. Finally, slitting machines slit large coils into the strips you want.Testing Equipment for brass plated steel strips We have a professional testing center where is settled with advanced equipment to analyze properties of copper steel, such as Rockwell hardness tester and peel force tester. Packaging of brass plated steel strips Coils are put into the plastic bags first then waterproof paper closely wraps the coil. In case of wet during the long journey, we put desiccant in the outside plastic package. Applications for brass plated steel strips 1) Bullets2) Cartridges3) Electronic stamping4) Electronic hardware5) Decoration 6) Radiators7) Drawing parts8) Covering parts 9) Connectors10) Heat Exchanger