Shanghai Metal Corporation
Main products:Stainless Steel Strip,Aluminium Foil,Copper Strip,Hot Dip Galvanized Steel Coil,Aluminium Tube
Products
Contact Us
  • Contact Person : Mr. manager sales
  • Company Name : Shanghai Metal Corporation
  • Tel : 86-21-5830-9368
  • Fax : 86-21-5081-9492
  • Address : Shanghai,Shanghai,1701 Yuan Mansion, 738 Dongfang Road, Shanghai City. China.
  • Country/Region : China
  • Zip : 200122

socket welded long radius elbow

socket welded long radius elbow
Product Detailed
socket welded long radius elbow 1. Material: 304, 304L, 321, 316, 316L, etc. 2. Standard: ASME, MSS, HG, DIN, JIS, GB

socket welded long radius elbow

Socket welded elbows is a type of socket welded fitting that is unthreaded, but has large sockets at both ends of a pipe. We offer wide range of socket weld 90 degree socket welded elbows. These fittings have center to face dimension and are typically used in tight areas where clearances are an issue. They are mostly used for changing the direction in piping and are also sometimes called a quarter bend.

1. Material: 304, 304L, 321, 316, 316L, etc.

2. Standard: ASME, MSS, HG, DIN, JIS, GB

3. Type: 90° and 45° Socket Welded Elbow

We offer Sanitary Fittings, Stainless Steel Sanitary Fittings, and Stainless Steel Tube Fittings that are manufactured using optimum quality stainless steel. Our wide array of sanitary stainless steel tee is known among the customer's due to its tensile strength. These Steel Tube Fittings in various grades and finishes as per the needs.

Specifications of Stainless Steel Butt Welded Elbow

1.         Size: 1/8"-4"; DN6-DN100

2.         Pressure: 3000#, 6000#, 9000#

3.         Standard: GB/T14383-2008

SH/T3410-1996(DN=10-80mm SCH80, sCH160)

HG/T21634-1998

ASME B16.11-2005

BS3799-1974

JIS B2316-2007

4.         Manufacture process: Forging or machining

Material:304-304H-304L-304N-304LN 316-316H-316L-316N-316LN 321-321H-347-347H

Nominal DiameterDepth SocketSocket BoreWall ThicknessCenter to Bottom of Socket
A
C(min)90°Elbow45°Elbow
DNNPSJ(min)B3000LB Sch806000LB Sch1609000LB XXS3000LB Sch806000LB Sch1609000LB XXS3000LB Sch806000LB Sch1609000LB XXS
61/81010.73.23.5-1111-88-
81/41014.13.34.0-1115-88-
103/81017.53.54.4-1315-812-
151/21021.84.15.28.2161925111316
203/41327.44.36.18.6192228131418
2511334.25.07.010.0222732141822
321.1/41342.95.37.010.6273235182122
401.1/21348.35.67.811.2323838212525
5021361.16.19.512.2384141252929
652.1/21676.9(73.8)7.712.5-4157-2932-
8031689.88.313.8-5764-3235-
100419115.59.4--66--42--
Note: 1. The average of socket wall thickness peripherally shall be no less than listed values. The minimum value is limited to localized areas. 2. Upper and lower values for socket weld elbow of each specification represent the maximum size and minimum size respectively.

Application of Stainless Steel Socket Weld Elbow

SW Fittings are family of high pressure fittings are used in various industrial processes.

1.         They are used for lines conveying flammable, toxic or expensive material where no leakage can be permitted, and for steam 300 to 600 PSI.

2.         They are used only in conjunction with ASME Pipe and are available in the same size range.

3.         They are used in areas where pipe-work is permanent and are designed to provide good flow characteristics.

4.         They are produced to several ASTM standards and are manufactured in accordance with ASME B16.11. The B16.11 standard covers pressure-temperature ratings, dimensions, tolerances, marking, and material requirements for forged carbon and alloy steel. Acceptable material forms are forgings, bars, seamless pipe, and seamless tubes which conform to the fittings chemical compositions, melting practices, and mechanical property requirements of ASTM A105, A182, or A350.

5.         They are available in three pressure ratings: 3000lbs, 6000lbs and 9000lbs.

Features of Stainless Steel Socket Weld Elbow

1.         The pipe need not be beveled for weld preparation.

2.         Temporary tack welding is no needed for alignment, because in principle the fitting ensures proper alignment.

3.         The weld metal can not penetrate into the bore of the pipe.

4.         They can be used in place of threaded fittings, so the risk of leakage is much smaller.

5.         Radiography is not practical on the fillet weld; therefore correct fitting and welding is crucial. The fillet weld may be inspected by surface examination, magnetic particle (MP), or liquid penetrant (PT) examination methods.

6.         Construction costs are lower than with butt-welded joints due to the lack of exacting fit-up requirements and elimination of special machining for butt weld end preparation.



Copyright Notice @ 2008-2012 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.